|
Do-It-Yourself Flat Glass Tinting
Get this complete instruction manual
loaded with illustrations to apply tinting to any flat glass window in
your home or office ~ for ONLY $89.95
Here is sample of what you’ll get…
Step
1. Pre-Cut Film Pattern ~ by first knowing what your total
length and width measurements are. Proceed to pull the film
out of your box and cut it (if it applies, have the shortest of the two
measurements be the distance of your pull). Then start your reverse roll
process, with a dry piece of film (as shown in figure 1a). From the
bottom of your pattern to the top, roll the pattern up into a
semi-tight tube (as shown in figure 1b) just enough to slip one finger
in-and-out of the core. Then place a piece of scotch tape in the center
to secure the free edge to the roll. Make a doubled-overlap in the tape
(as a tab) for ease of removal. Place roll aside for now.
Bonus Tip: If
you have two windows in the same frame, always tint the top window
first and let it dry. If you tint the bottom window first, you will
have the risk of the solution seeping down from the top
installation into the pattern on the bottom due to gravity.
Along
with these easy to follow directions, you will be shown the right tools
for the job and the “what to do’s” before you start the installation.
Plus
you will receive 3 FREE email tech support questions, just in case you
get in a jam!
So take advantage of over 20 years of
Knowledge & Experience that’s being handed down just for you
…..and it’s only one click away!!!
Windowtinting.com - School of the Trade
Installation instruction & illustration provided
are guide lines only and individual results may vary.
|
